Imperial Pure Metalgon™ Replacement Filter
Imperial Pure Metalgon™ Replacement Filter
This filter is for the Crown Models only.This is the newest and most efficient filter with added protection from chloramine, THMs, HAAs, chemicals, fluoride and heavy metals.
Key Features:
- 2 micron particulate reduction
- Enhanced chemical and heavy metal removal
- Reduced bad taste and odor
- Reduces chlorine and chloramines
- THM and VOC Reduction
- Fluoride and Heavy Metal Reduction
Replacing Filters
- Filter should be replaced every 9-12 months for a family of 1-2
- Filter should be replaced every 6-9 months for a family of 3+.
- Filter should be replaced every 6 months or sooner for a family of 4+.
Performance Data
Contaminants Reduction Results Lead @ 150 ppb >99%, 1000 gallons* Chlorine @ 2 ppm >99%, 1000 gallons Chloramine @ 3 ppm >99%, 700 gallons* THMs & HAAs >98% VOCs ~95%, 400 gallons Particulates @ 2 Microns >95% Bad taste and Odor Class I Fluoride @ 0.8 ppm >85%** Aluminum, Arsenic III + V, Cadmium,
Chromium III, Iron, Manganese, Nickel>80% Mercury, Chromium VI ~50% *This filter has been independently tested at Pace Laboratories to NSF/ANSI Standards 42 and 53 for the reduction of chloramines and lead.
**This filter has been independently tested at the Water Quality Assocaition Laboratory for the reduction of fluoride in municipal drinking water.-Certain States prohibit health claims as a matter of state law. Such claims not in compliance are hereby withdrawn. The information herein does not imply, indicate, signify or suggest that your drinking water contains harmful contaminants or that water treatment devices are an acceptable permanent alternative to central water treatment by your supplier. Further, percentage of reduction will vary over the life of the filter. These filters were not intended for use where water is microbiologically unsafe.